This collection contains iron sights for the CZ Shadow 2. They are made by LPA in Italy, Angry Bear in the USA, Zendl in the Czech Republic and CZ in the Czech Republic. For the CZ 75 SP-01 Shadow, see Sights for CZ 75 SP-01 Shadow.
Sights for the CZ Shadow 2
| Sights |
Sight picture |
Maker |
| CZ Shadow 2 Orange front sight 7.5 mm |
blank |
CZ |
| CZ Shadow 2 Orange front sight 7.5 x 1.5 mm |
fiber optic |
Zendl |
| CZ Shadow 2 adjustable rear sight |
blank, fiber optic |
Zendl |
| CZ Shadow 2 adjustable rear sight |
white dots, white lines |
LPA |
| CZ Shadow 2 front sight 7.5 mm |
blank |
Zendl |
| CZ Shadow 2 front sight 7.5 x 1.0 mm |
fiber optic |
Zendl |
| CZ Shadow 2 front sight 7.5 x 1.5 mm |
fiber optic |
Zendl |
| CZ Shadow 2, CZ 75 SP-01 Shadow adjustable sights |
blank, fiber optic A, fiber optic B |
Zendl |
| CZ Shadow 2, CZ 75 SP-01 Shadow adjustable sights |
fiber optic, luminescent dots, white dots |
LPA |
| CZ Shadow 2, CZ TS 2, CZ 75B, CZ P-01, CZ 75 SP-01 front sight filler |
- |
Angry Bear |
A title with "front sight" or "rear sight" means a single part. All other sights are sets of front and rear sight.
Which sights to choose
-
You want to zero for your ammunition or shoot competition: adjustable sights. You set windage and elevation with screws.
-
You want to keep your front sight: an adjustable rear sight alone.
-
You only want a brighter front sight: a single front sight.
The sights in detail
-
Front sights from Angry Bear, CZ and Zendl, in blank and fiber optic. You change only the front sight and keep the rear sight.
-
Adjustable rear sights from LPA and Zendl, in blank, fiber optic, white dots and white lines. You keep your front sight and set windage and elevation on the rear sight with screws.
-
Adjustable sights from LPA and Zendl, in blank, fiber optic, luminescent dots and white dots. You set windage and elevation with screws, so you can zero them for your ammunition.
How to zero adjustable sights
Shoot a group at a fixed distance. Move the rear sight in the direction you want the point of impact to move: to the right to move hits to the right, up to move hits up. Turn the screw a few clicks at a time and shoot again.
Fit
- They also fit CZ 75 SP-01 Shadow models.
- They also fit Optics Ready variants of CZ Shadow 2, incl.
Sight picture
Fiber optic collects daylight and shines brightly at the range and in competition. Luminescent dots charge in light and glow for a while in the dark. Blank sights have a plain grooved surface without any marks. White dots and white lines give contrast without glowing.
Installation
Most pistol sights sit in a dovetail. You drift the old sight out and the new one in with a sight pusher or a punch. See Installation tools.
For red dot mounts, see Red dot mounts for CZ Shadow 2. For all sights of this brand, see Sights for CZ models.
Frequently asked questions
Can I change the sights on my CZ Shadow 2 at home?
Yes, with a sight pusher or a punch. Drift the old sight out of the dovetail and push the new one in. If you do not have the tool, a gunsmith can do it for you.
Which sights should I choose for my CZ Shadow 2?
It depends on how you shoot:
-
You want to zero for your ammunition or shoot competition: adjustable sights. You set windage and elevation with screws.
-
You want to keep your front sight: an adjustable rear sight alone.
-
You only want a brighter front sight: a single front sight.
Do these sights fit both the classic and the Optics Ready variant?
No. They also fit Optics Ready variants of CZ Shadow 2, incl.
Do I get both the front and the rear sight?
Yes, unless the title says "front sight" or "rear sight". Then you get only that part.
