Optics ready plates for CZ Shadow 2 Optics Ready

This collection contains optic plates for the CZ Shadow 2 Optics Ready. The plate goes into the factory optic cut of the slide and takes the red dot on top. Every plate is made for one footprint or a group of footprints, so you choose it by the footprint of your red dot. For the CZ Shadow 2 Compact and CZ Shadow 2 Orange OR, see Optics ready plates for CZ Shadow 2 Compact and Optics ready plates for CZ Shadow 2 Orange OR.

Footprints for the CZ Shadow 2 Optics Ready

• Trijicon RMR: plates from CZ, Impact Machine (with rear sight), 2BME, Eemann Tech and Evo Arms.
• Shield RMSc: plates from Evo Arms and Eemann Tech.
• Holosun K-series: plates from Eemann Tech and Evo Arms.
• Leupold DPP: plates from CZ, Eemann Tech and 2BME.
• Docter: plates from CZ, Eemann Tech and Evo Arms.
• C-More RTS: plates from CZ and Eemann Tech.
• Aimpoint Acro: a plate from CZ.
• Holosun 509T: a plate from Impact Machine.
• Aimpoint A-CUT: a plate from Eemann Tech.

Plates for several footprints

• CZ: Shield RMSc and Holosun K-series.
• Impact Machine type S: Shield RMSc, Holosun K-series and Leupold DPP.
• Outer Impact type C: Trijicon RMR, Docter and C-More RTS.
• Toni System type A: Shield RMSc, Leupold DPP and Docter.
• Eemann Tech type D: Docter and Sig Romeo1.
• Toni System type E: C-More RTS and Vortex Razor.
• Toni System type S: Trijicon RMR and C-More RTS.

The type letters differ between makers. Always read the footprints in the brackets.

Plates with a rear sight

Some plates have an integrated rear sight, so you keep iron sights with the red dot mounted. You aim through the red dot and still have a sight picture if it fails. Here they are made by Impact Machine for the RMR, RMSc, K-series and DPP footprints.

Material

CZ, Impact Machine, Eemann Tech and Evo Arms make their plates from steel. 2BME, Outer Impact and Toni System make their plates from aluminium. An aluminium plate is lighter. A steel plate is heavier and robust.

Red dot without a plate

The Vector Optics Frenzy 1x20x24 for CZ Shadow 2 OR fits the optic cut directly, without a plate.

Installation

Remove the cover plate from the optic cut, put the plate in and screw the red dot onto it. Use threadlocker on every screw. No milling and no gunsmith are needed. The recommended torque for the plate screws is 1. If you lose or damage the screws, we have spare screws for these plates.

For the CZ Shadow 2 without optic cut, see Red dot mounts for CZ Shadow 2. For iron sights, see Sights for CZ Shadow 2. For all plates of this brand, see Optics ready plates for CZ models.

Frequently asked questions

Can I install an optic plate on my CZ Shadow 2 Optics Ready at home?

Yes. You need no gunsmith and no milling.

1. Remove the cover plate from the optic cut.
2. Screw the optic plate into the cut.
3. Screw the red dot onto the plate.

Put a drop of threadlocker on every screw.

Which red dots will fit my CZ Shadow 2 Optics Ready?

It depends on the plate you choose. For the CZ Shadow 2 Optics Ready we have plates for the Trijicon RMR, Shield RMSc, Holosun K-series, Leupold DPP, Docter, C-More RTS, Aimpoint Acro, Holosun 509T, Aimpoint A-CUT, Vortex Razor and Sig Romeo1 footprints. Choose your red dot, find its footprint in the specifications and take the plate with the same footprint.

Can I keep iron sights with a red dot on the CZ Shadow 2 Optics Ready?

Yes. Take a plate with an integrated rear sight. You aim through the red dot and still have iron sights if the red dot fails.

Is there a red dot that fits without a plate?

Yes. The Vector Optics Frenzy 1x20x24 for CZ Shadow 2 OR goes straight into the optic cut.

My CZ Shadow 2 has no optic cut. What do I need?

A red dot mount instead of a plate. It goes into the rear sight dovetail in place of the rear sight. See Red dot mounts for CZ Shadow 2.