Red dot adapters for KMR models

This collection brings together every red dot adapter we have for KMR models: optics ready plates for KMR models with a factory optic cut, and red dot mounts for KMR models without one. Pick your model above and you see only the plates or mounts that fit it.

Plate or mount: which one does your KMR model take

• Optics Ready KMR models have a factory optic cut in the slide, closed with a cover plate. They take an optics ready plate. The plate goes into the cut and connects it to the footprint of your red dot.
• KMR models without an optic cut take a red dot mount. The mount replaces the rear sight in its dovetail. You need no slide milling and no permanent modifications.

A mount does not fit an Optics Ready model, and a plate does not fit a model without the cut. Choose your exact model, including the Optics Ready (OR) or MOS part of its name.

Optics Ready KMR models

We have optic plates for KMR pistols with a factory optic cut. KMR is a Czech maker of competition pistols. Plates are available for the L-02, W-02 and S-02 Optics Ready models. Almost all plates are made by KMR itself from steel in the Czech Republic.

Two plate families

• W-02 and L-02: one plate family fits both lines. This includes the L-02 Orca OR, Emig OR, Spectra and Umbra, and the W-02 Cuda OR, Spectra S and Umbra X. See Optic ready plates for KMR L-02 Orca OR and Optic ready plates for KMR W-02 Cuda OR.
• S-02: its own plate family. See Optic ready plates for KMR S-02.

An S-02 plate does not fit the W-02 or L-02, and the other way round.

Footprints

Both families have plates for eight footprints: Trijicon RMR, Shield RMSc, Leupold DPP, Docter, C-More RTS, Aimpoint Acro, Vortex Razor and Meopta Meored. For the W-02 and L-02, Eemann Tech also makes a type D plate for Shield RMSc and Docter.

Which red dot for which footprint

Which red dots go on which footprint, with examples from our range:

• Trijicon RMR: for example the Holosun 407C, 507C and 508T, Olight Osight and Vector Optics Frenzy-X. See Red dots with Trijicon RMR footprint.
• Shield RMSc: Shield red dots, the Holosun EPS Core, Olight Osight K, S and SE and Vector Optics Frenzy-S. See Red dots with Shield RMSc footprint.
• Leupold DPP: for example the Holosun SCS 320, Olight Osight SE DPP and Vortex Defender ST and XL. See Red dots with Leupold DPP footprint.
• Docter: also called Vortex Venom or Noblex, for example the Vector Optics Frenzy 1x17x24 and Frenzy-X 1x20x28. See Red dots with Docter footprint.
• C-More RTS: the C-More RTS, the Toni System ZR, ZV and ZX and the Vector Optics Frenzy Plus. See Red dots with C-More RTS footprint.
• Aimpoint Acro: enclosed red dots such as the Steiner MPS. See Red dots with Aimpoint Acro footprint.

The Vortex Razor and Meopta Meored plates are for these red dots only.

KMR models by plate family

• L-02 line: L-02 Orca OR, L-02 Emig OR, L-02 Spectra and L-02 Umbra.
• W-02 line: W-02 Cuda OR, W-02 Spectra S and W-02 Umbra X.
• S-02 line: the S-02 Optics Ready.

The product page of each plate lists the KMR models it fits.

Enclosed red dots on a KMR

An enclosed red dot keeps rain, mud and dust away from the LED. With an Aimpoint Acro plate, you can mount an enclosed red dot with the Acro footprint on any of the three lines.

Steel plates

Steel plates are heavier than aluminium plates. On a competition pistol, the extra weight sits on the slide.

All optic plates at a glance

The table lists every product in this page. The middle column gives the footprints, so you can check at once which red dots it takes.

Installation

Remove the factory cover plate from the optic cut. Screw the optic plate into its place, then screw the red dot onto the plate. No milling is needed and you can do it yourself. Threadlocker on the screws is recommended.

For plates for other brands, see Optics ready plates.

KMR models without an optic cut

We have red dot mounts for KMR pistols. KMR is a Czech maker of competition pistols. All mounts here are made by KMR itself from aluminium in the Czech Republic.

• KMR L-02: rail mounts and frame mounts, incl. dedicated frame mounts for the L-02 Emiq. See Red dot mounts for KMR L-02.
• KMR S-02: frame mounts. See Red dot mounts for KMR S-02.
• KMR W-02: rail mounts and frame mounts. See Red dot mounts for KMR W-02.

The mounts are available for Trijicon RMR, Shield RMSc and C-More RTS footprints. For KMR pistols with a factory optic cut, see Optics ready plates for KMR models.

Related collections

For the tools you need, see Installation tools. For other brands, see Red dot adapters.

Frequently asked questions

Can I install an optic plate on my KMR at home?

Yes. No milling is needed, and you can do it yourself.

1. Remove the cover plate from the optic cut.
2. Screw the optic plate into the cut.
3. Screw the red dot onto the plate.

Put a drop of threadlocker on every screw.

Which red dots will fit my KMR?

It depends on the plate you choose. Every plate takes one footprint or a group of footprints. For KMR pistols we have plates for the Trijicon RMR, Shield RMSc, Leupold DPP, Docter, C-More RTS, Aimpoint Acro, Vortex Razor, Meopta Meored and Sig Romeo1 footprints.

Choose your red dot first and find its footprint in the specifications. Then take the plate with the same footprint.

Which plate fits my L-02 Spectra?

A plate from the W-02 and L-02 family, with the footprint of your red dot. The S-02 has its own plates.

Do you have a plate for the Meopta Meored?

Yes, for the W-02 and L-02 and for the S-02.