Optics ready plates for Sig P320-XFULL

This collection contains optic plates for the Sig P320-XFULL. The plate goes into the factory optic cut of the slide and takes the red dot on top. Every plate is made for one footprint or a group of footprints, so you choose it by the footprint of your red dot.

Footprints for the Sig P320-XFULL

• Trijicon RMR: plates from Night Fision and 2BME.
• Holosun K-series: a plate from 2BME.
• Holosun EPS: a plate from 2BME.

Plates for several footprints

• Outer Impact type C: Trijicon RMR, Docter and C-More RTS.

The type letters differ between makers. Always read the footprints in the brackets.

Material

Outer Impact, 2BME and Night Fision make their plates from aluminium.

Installation

Remove the cover plate from the optic cut, put the plate in and screw the red dot onto it. Use threadlocker on every screw. No milling and no gunsmith are needed.

All plates at a glance

Which red dot for which footprint

• Trijicon RMR: for example the Holosun 407C, 507C and 508T, Olight Osight and Vector Optics Frenzy-X. See Red dots with Trijicon RMR footprint.
• Holosun K-series: the Holosun 407K and 507K, EPS Carry and SCS Carry. See Red dots with Holosun K-series footprint.
• Docter: also called Vortex Venom or Noblex, for example the Vector Optics Frenzy 1x17x24 and Frenzy-X 1x20x28. See Red dots with Docter footprint.
• C-More RTS: the C-More RTS, the Toni System ZR, ZV and ZX and the Vector Optics Frenzy Plus. See Red dots with C-More RTS footprint.

For all plates of this brand, see Optics ready plates for Sig models.

Frequently asked questions

Can I install an optic plate on my Sig P320-XFULL at home?

Yes. You need no gunsmith and no milling.

1. Remove the cover plate from the optic cut.
2. Screw the optic plate into the cut.
3. Screw the red dot onto the plate.

Put a drop of threadlocker on every screw.

Which red dots will fit my Sig P320-XFULL?

It depends on the plate you choose. For the Sig P320-XFULL we have plates for the Trijicon RMR, Holosun K-series, Docter, C-More RTS and Holosun EPS footprints. Choose your red dot, find its footprint in the specifications and take the plate with the same footprint.