This collection contains optic plates for the CZ P-10C Optics Ready. The plate goes into the factory optic cut and takes the red dot on top. We have plates for the Trijicon RMR, Shield RMSc, Holosun K-series, Leupold DPP, Docter, C-More RTS, Aimpoint Acro, Holosun 509T and Vortex Razor footprints, made by 2BME, CZ, Eemann Tech, Evo Arms and Holosun.
Choose the plate by the footprint of your red dot and check that your model is named in the title. You find a full guide to these plates, their footprints, materials and installation in Optics ready plates for CZ P-10C Ported.
Plates at a glance
| Plate |
Footprints |
Maker |
| CZ P-10 Optics Ready plate |
Aimpoint Acro footprint, C-More RTS footprint, Docter footprint, Leupold DPP footprint, Shield RMSc & Holosun K-series footprint, Trijicon RMR footprint, Vortex Razor footprint |
CZ |
| CZ P-10 Optics Ready plate |
Docter footprint, Holosun K-series footprint, Shield RMSc footprint, Trijicon RMR footprint |
Evo Arms |
| CZ P-10 Optics Ready plate |
Docter footprint, Holosun K-series footprint, Shield RMSc footprint, Trijicon RMR footprint |
Eemann Tech |
| CZ P-10 Optics Ready plate |
Holosun 509T footprint |
Holosun |
| CZ P-10 Optics Ready plate |
Holosun K-series footprint, Leupold DPP footprint |
2BME |
Frequently asked questions
Can I install an optic plate on my CZ P-10C Optics Ready at home?
Yes. Remove the cover plate from the optic cut, screw the plate in and screw the red dot onto it. Put a drop of threadlocker on every screw. No milling and no gunsmith are needed.
Which red dots will fit my CZ P-10C Optics Ready?
It depends on the plate you choose. The plates here take the Trijicon RMR, Shield RMSc, Holosun K-series, Leupold DPP, Docter, C-More RTS, Aimpoint Acro, Holosun 509T and Vortex Razor footprints. Find the footprint of your red dot in its specifications and take the plate with the same footprint.
