Sights for Walther models

This collection contains iron sights for Walther pistols. They come from LPA in Italy, Angry Bear and Night Fision in the USA and Zendl in the Czech Republic.

Sights for the Walther PDP

The PDP sights fit both PDP 1.0 (before 2022) and PDP 2.0 (from 2022). Available are co-witness sights, semi-adjustable co-witness sights, low sights, adjustable sights and fiber optic sets. Co-witness sights are tall, so you see them through a red dot window. Low sights are for shooting without a red dot. See Sights for Walther PDP, Sights for Walther PDP [Low] and Sights for Walther PDP [Tall].

Which PDP sights to choose

The PDP sights fit all PDP series: Compact, Full Size, Steel Match, F-series and Pro.

• Low-profile sights: Zendl fiber optic sets A and B, and low sights in blank, fiber optic or tritium. For shooting with iron sights only.
• Adjustable sights: Zendl low-profile sights with fiber optic, fully adjustable for windage and elevation.
• Co-witness sights: taller sights in blank, fiber optic or tritium for a PDP with a red dot.
• Semi-adjustable co-witness sights: LPA, adjustable for elevation, in fiber optic, luminescent dots or white dots. You set windage by moving the sight in the dovetail.

Sights for the Q4 SF OR and Q5 Match SF

Adjustable sights for both models in fiber optic, luminescent dots or white dots. The Q5 Match SF also has an LPA adjustable rear sight. See Sights for Walther Q4 SF OR and Sights for Walther Q5 Match SF.

Sights for the PPQ, P99, Creed, PPX and PPS

These models share sights: an adjustable rear sight, adjustable sights and tritium sights. Most of them are not for Optics Ready variants. See Sights for Walther PPQ, Sights for Walther PPQ M2, Sights for Walther P99, Sights for Walther Creed, Sights for Walther PPX and Sights for Walther PPS [M2].

All Walther sights at a glance

Every sight in this collection with the versions you can choose and the maker.

The sights for the PPQ, P99, Creed, PPX and PPS are made for the PPQ and PPQ M2 in 9x19 and the P99.

Sight picture

The end of each title names the sight picture. Fiber optic is bright in daylight. Tritium glows in the dark. Luminescent dots charge in light and glow for a while. White dots and white lines give contrast without glowing. Blank sights have a plain grooved surface.

A title with "front sight" or "rear sight" means a single part. Most other sights are complete sets of front and rear sight.

Installation

Most sights sit in a dovetail. You drift the old sight out and the new one in with a sight pusher or a punch. See Installation tools.

For red dot mounts for Walther, see Red dot mounts for Walther models.

Frequently asked questions

Can I change the sights on my Walther at home?

Yes, with a sight pusher or a punch. Drift the old sight out of the dovetail and push the new one in. If you do not have the tool, a gunsmith can do it for you. See Installation tools.

Which sights should I choose for my Walther?

It depends on how you shoot:

• You use a red dot: co-witness sights. They are tall enough to see through the red dot window.
• You shoot with iron sights only: low sights or standard sights.
• You want to zero for your ammunition or shoot competition: adjustable sights. You set windage and elevation with screws.
• You shoot in poor light: tritium. It glows in the dark without charging.
• You shoot in daylight, at the range or in competition: fiber optic.

Do PDP sights fit my PDP 2.0?

Yes. They fit the PDP 1.0 (until 2022) and the PDP 2.0 (from 2022), in all series including the F-series.

Do PPQ sights fit my PPQ with optic cut?

No. The sights for the PPQ, P99, Creed, PPX and PPS are not for Optics Ready variants.